GPS
/
gpstracker-pcb
mirror da https://github.com/blemasle/gpstracker-pcb.git
1
0
Forka 0
Codice Problemi 0 Rilasci 1 Wiki Attività
45 Commit
2 Rami (Branch)
4.5 MiB
Albero (Tree): 828ad45acf
Rami (Branch) Tag
${ item.name }
Crea branch ${ searchTerm }
da '828ad45acf'
${ noResults }
Grafico dei commit

45 Commit (828ad45acf787febbdf8bd2ac6ae91a4a3ff9619)
 

Autore SHA1 Messaggio Data
  Bertrand Lemasle 828ad45acf Pulled down WP pin of 24LC512 to avoid floating pin issues that prevents writing to the chip (not reported on pcb yet). 7 anni fa
  Bertrand Lemasle bc2a7618d2 Fixed LED6 & LED7 being polarity reversed 7 anni fa
  Bertrand Lemasle 38c97b81bb Made SIM808 pads longer for easier hand soldering 7 anni fa
  Bertrand Lemasle 8ec63316ca Fix SIM808 reset pin being tied to hardware reset. Fixed ground pads on sdcard 7 anni fa
  Bertrand Lemasle 9d53e08a83 Replaced MOLEX_104031-0811 with cheaper and easier Hirose_DM3AT-SF-PEJM5 7 anni fa
  Bertrand Lemasle e5751217e4 Move sd card right pull up resistor a bit avoid conflicts 7 anni fa
  Bertrand Lemasle 42c2b91ba7 Moved some silkscreen references 7 anni fa
  Bertrand Lemasle 47a778f68c Enhanced routing of the sd card pullup resistors 7 anni fa
  Bertrand Lemasle b6cb5a5e01 Moved SIM808_S track a bit to leave more room for GND1 of the SIM card 7 anni fa
  Bertrand Lemasle 21a01c8439 PCB version bump 7 anni fa
  Bertrand Lemasle 48c7bd821a Augmented the pad size of the battery holder for hand soldering 7 anni fa
  Bertrand Lemasle c96a87e59e Flip back sd card footprint. Routing around pull up resistor is to be redone 7 anni fa
  Bertrand Lemasle d9a28ad356 Disconnected SD card detect from ground. Made usb GND pad bigger 7 anni fa
  Bertrand Lemasle 03e770195f Updated schematics references with updated and available parts. This is the version that was ordered on Mouser/Seeedstudio 7 anni fa
  Bertrand Lemasle 66161c4925 Update BOM and added some vias 7 anni fa
  Bertrand Lemasle 1dc73b9fc9 Moved BT2 up 7 anni fa
  Bertrand Lemasle 0eba807da4 Rounded corners 7 anni fa
  Bertrand Lemasle 0b60073f21 Changed PCB with the Wuerth USB connector 7 anni fa
  Bertrand Lemasle 96dc2a3d7d Replaced USB connector by Wuerth one 7 anni fa
  Bertrand Lemasle 03a1c095a5 Fixed references for 4.7uF capacitor 7 anni fa
  Bertrand Lemasle fc234d3e83 Ordered PCB 7 anni fa
  Bertrand Lemasle 971eb22091 Made the usb connector vertical 7 anni fa
  Bertrand Lemasle 0686718167 Specified conda and resistors. PCB needs to be updated (usb condo from 1210 to 0805) 7 anni fa
  Bertrand Lemasle 6e3e05ebd8 Change a few tracks/via to avoid ground planes breaks 7 anni fa
  Bertrand Lemasle a510935557 Submitted version for verification 7 anni fa
  Bertrand Lemasle 11deba268e Antennas tracks impedance to 50ohm (1.5mm thick) 7 anni fa
  Bertrand Lemasle 66d3bf63f8 Added vias to the whole PCB 7 anni fa
  Bertrand Lemasle 9f3deffa4d Added via near decoupling capacitors 7 anni fa
  Bertrand Lemasle 4c02ff9bcf Fix libraries path to enhance portability accross different machines 7 anni fa
  Bertrand Lemasle 746f8c3d77 Finished PCB, powering eeprom from arduino 7 anni fa
  Bertrand Lemasle 44b3b7e7bf Finsihed routing 7 anni fa
  Bertrand Lemasle 9c731345c3 Most of the routing is done (missing sdcard) 7 anni fa
  Bertrand Lemasle dce640f8fa All major components are roughly placed 7 anni fa
  Bertrand Lemasle 4d1710a561 Redo - Arduino, Sim & power supply 7 anni fa
  Bertrand Lemasle e588336a6f Started redo - FTDI / USB 7 anni fa
  Bertrand Lemasle fb001571c7 More routing 7 anni fa
  Bertrand Lemasle 57aa544bd4 Started routing 7 anni fa
  Bertrand Lemasle 24c91ba794 Component placement 7 anni fa
  Bertrand Lemasle 7022ed6f4d Done schematic (not verified) 7 anni fa
  Bertrand Lemasle d99a681386 Started footprints assignment 7 anni fa
  Bertrand Lemasle f66c705769 Replaced SIM808 lib with a better one 7 anni fa
  Bertrand Lemasle 07aa405293 Circuitry is mostly done 7 anni fa
  Bertrand Lemasle 35928e09c8 Power supplies 7 anni fa
  Bertrand Lemasle 774a993cb1 Major building blocks are there 7 anni fa
  Bertrand Lemasle 01882e9250 Initial commit. Many additional librairies will be removed later 7 anni fa