45 Комити (828ad45acf787febbdf8bd2ac6ae91a4a3ff9619)

 

All Branches   

Search

Аутор	SHA1	Порука	Датум
Bertrand Lemasle	828ad45acf	Pulled down WP pin of 24LC512 to avoid floating pin issues that prevents writing to the chip (not reported on pcb yet).	пре 7 година
Bertrand Lemasle	bc2a7618d2	Fixed LED6 & LED7 being polarity reversed	пре 7 година
Bertrand Lemasle	38c97b81bb	Made SIM808 pads longer for easier hand soldering	пре 7 година
Bertrand Lemasle	8ec63316ca	Fix SIM808 reset pin being tied to hardware reset. Fixed ground pads on sdcard	пре 7 година
Bertrand Lemasle	9d53e08a83	Replaced MOLEX_104031-0811 with cheaper and easier Hirose_DM3AT-SF-PEJM5	пре 7 година
Bertrand Lemasle	e5751217e4	Move sd card right pull up resistor a bit avoid conflicts	пре 7 година
Bertrand Lemasle	42c2b91ba7	Moved some silkscreen references	пре 7 година
Bertrand Lemasle	47a778f68c	Enhanced routing of the sd card pullup resistors	пре 7 година
Bertrand Lemasle	b6cb5a5e01	Moved SIM808_S track a bit to leave more room for GND1 of the SIM card	пре 7 година
Bertrand Lemasle	21a01c8439	PCB version bump	пре 7 година
Bertrand Lemasle	48c7bd821a	Augmented the pad size of the battery holder for hand soldering	пре 7 година
Bertrand Lemasle	c96a87e59e	Flip back sd card footprint. Routing around pull up resistor is to be redone	пре 7 година
Bertrand Lemasle	d9a28ad356	Disconnected SD card detect from ground. Made usb GND pad bigger	пре 7 година
Bertrand Lemasle	03e770195f	Updated schematics references with updated and available parts. This is the version that was ordered on Mouser/Seeedstudio	пре 7 година
Bertrand Lemasle	66161c4925	Update BOM and added some vias	пре 7 година
Bertrand Lemasle	1dc73b9fc9	Moved BT2 up	пре 7 година
Bertrand Lemasle	0eba807da4	Rounded corners	пре 7 година
Bertrand Lemasle	0b60073f21	Changed PCB with the Wuerth USB connector	пре 7 година
Bertrand Lemasle	96dc2a3d7d	Replaced USB connector by Wuerth one	пре 7 година
Bertrand Lemasle	03a1c095a5	Fixed references for 4.7uF capacitor	пре 7 година
Bertrand Lemasle	fc234d3e83	Ordered PCB	пре 7 година
Bertrand Lemasle	971eb22091	Made the usb connector vertical	пре 7 година
Bertrand Lemasle	0686718167	Specified conda and resistors. PCB needs to be updated (usb condo from 1210 to 0805)	пре 7 година
Bertrand Lemasle	6e3e05ebd8	Change a few tracks/via to avoid ground planes breaks	пре 7 година
Bertrand Lemasle	a510935557	Submitted version for verification	пре 7 година
Bertrand Lemasle	11deba268e	Antennas tracks impedance to 50ohm (1.5mm thick)	пре 7 година
Bertrand Lemasle	66d3bf63f8	Added vias to the whole PCB	пре 7 година
Bertrand Lemasle	9f3deffa4d	Added via near decoupling capacitors	пре 7 година
Bertrand Lemasle	4c02ff9bcf	Fix libraries path to enhance portability accross different machines	пре 7 година
Bertrand Lemasle	746f8c3d77	Finished PCB, powering eeprom from arduino	пре 7 година
Bertrand Lemasle	44b3b7e7bf	Finsihed routing	пре 7 година
Bertrand Lemasle	9c731345c3	Most of the routing is done (missing sdcard)	пре 7 година
Bertrand Lemasle	dce640f8fa	All major components are roughly placed	пре 7 година
Bertrand Lemasle	4d1710a561	Redo - Arduino, Sim & power supply	пре 7 година
Bertrand Lemasle	e588336a6f	Started redo - FTDI / USB	пре 7 година
Bertrand Lemasle	fb001571c7	More routing	пре 7 година
Bertrand Lemasle	57aa544bd4	Started routing	пре 7 година
Bertrand Lemasle	24c91ba794	Component placement	пре 7 година
Bertrand Lemasle	7022ed6f4d	Done schematic (not verified)	пре 7 година
Bertrand Lemasle	d99a681386	Started footprints assignment	пре 7 година
Bertrand Lemasle	f66c705769	Replaced SIM808 lib with a better one	пре 7 година
Bertrand Lemasle	07aa405293	Circuitry is mostly done	пре 7 година
Bertrand Lemasle	35928e09c8	Power supplies	пре 7 година
Bertrand Lemasle	774a993cb1	Major building blocks are there	пре 7 година
Bertrand Lemasle	01882e9250	Initial commit. Many additional librairies will be removed later	пре 7 година