GPS
/
gpstracker-pcb
镜像自地址 https://github.com/blemasle/gpstracker-pcb.git
1
0
派生 0
代码 工单 0 版本发布 1 百科 动态
47 提交
2 分支
2.7 MiB
目录树: fdadbf290b
分支列表 标签列表
${ item.name }
创建分支 ${ searchTerm }
从 'fdadbf290b'
${ noResults }
提交图

36 次代码提交 (fdadbf290ba0e57b8d232ebaf2ee97eb3454e8cd)

作者 SHA1 备注 提交日期
  Bertrand Lemasle fdadbf290b Reported last changes from schematics to PCB 7 年前
  Bertrand Lemasle bc2a7618d2 Fixed LED6 & LED7 being polarity reversed 7 年前
  Bertrand Lemasle 38c97b81bb Made SIM808 pads longer for easier hand soldering 7 年前
  Bertrand Lemasle 8ec63316ca Fix SIM808 reset pin being tied to hardware reset. Fixed ground pads on sdcard 7 年前
  Bertrand Lemasle 9d53e08a83 Replaced MOLEX_104031-0811 with cheaper and easier Hirose_DM3AT-SF-PEJM5 7 年前
  Bertrand Lemasle e5751217e4 Move sd card right pull up resistor a bit avoid conflicts 7 年前
  Bertrand Lemasle 42c2b91ba7 Moved some silkscreen references 7 年前
  Bertrand Lemasle 47a778f68c Enhanced routing of the sd card pullup resistors 7 年前
  Bertrand Lemasle b6cb5a5e01 Moved SIM808_S track a bit to leave more room for GND1 of the SIM card 7 年前
  Bertrand Lemasle 21a01c8439 PCB version bump 7 年前
  Bertrand Lemasle 48c7bd821a Augmented the pad size of the battery holder for hand soldering 7 年前
  Bertrand Lemasle c96a87e59e Flip back sd card footprint. Routing around pull up resistor is to be redone 7 年前
  Bertrand Lemasle d9a28ad356 Disconnected SD card detect from ground. Made usb GND pad bigger 7 年前
  Bertrand Lemasle 03e770195f Updated schematics references with updated and available parts. This is the version that was ordered on Mouser/Seeedstudio 7 年前
  Bertrand Lemasle 66161c4925 Update BOM and added some vias 7 年前
  Bertrand Lemasle 1dc73b9fc9 Moved BT2 up 7 年前
  Bertrand Lemasle 0eba807da4 Rounded corners 7 年前
  Bertrand Lemasle 0b60073f21 Changed PCB with the Wuerth USB connector 7 年前
  Bertrand Lemasle fc234d3e83 Ordered PCB 7 年前
  Bertrand Lemasle 971eb22091 Made the usb connector vertical 7 年前
  Bertrand Lemasle 6e3e05ebd8 Change a few tracks/via to avoid ground planes breaks 7 年前
  Bertrand Lemasle a510935557 Submitted version for verification 7 年前
  Bertrand Lemasle 11deba268e Antennas tracks impedance to 50ohm (1.5mm thick) 7 年前
  Bertrand Lemasle 66d3bf63f8 Added vias to the whole PCB 7 年前
  Bertrand Lemasle 9f3deffa4d Added via near decoupling capacitors 7 年前
  Bertrand Lemasle 746f8c3d77 Finished PCB, powering eeprom from arduino 7 年前
  Bertrand Lemasle 44b3b7e7bf Finsihed routing 7 年前
  Bertrand Lemasle 9c731345c3 Most of the routing is done (missing sdcard) 7 年前
  Bertrand Lemasle dce640f8fa All major components are roughly placed 7 年前
  Bertrand Lemasle 4d1710a561 Redo - Arduino, Sim & power supply 7 年前
  Bertrand Lemasle e588336a6f Started redo - FTDI / USB 7 年前
  Bertrand Lemasle fb001571c7 More routing 7 年前
  Bertrand Lemasle 57aa544bd4 Started routing 7 年前
  Bertrand Lemasle 24c91ba794 Component placement 7 年前
  Bertrand Lemasle 7022ed6f4d Done schematic (not verified) 7 年前
  Bertrand Lemasle 01882e9250 Initial commit. Many additional librairies will be removed later 7 年前