46 Révisions (e74186b7daf70114c0267469326bdf202085f57c)

 

Toutes les branches   

Chercher

Auteur	SHA1	Message	Date
Bertrand Lemasle	e74186b7da	Changed MCP73831T-2ACI/OT to MCP73832T-5ACI/OT	il y a 7 ans
Bertrand Lemasle	828ad45acf	Pulled down WP pin of 24LC512 to avoid floating pin issues that prevents writing to the chip (not reported on pcb yet).	il y a 7 ans
Bertrand Lemasle	bc2a7618d2	Fixed LED6 & LED7 being polarity reversed	il y a 7 ans
Bertrand Lemasle	38c97b81bb	Made SIM808 pads longer for easier hand soldering	il y a 7 ans
Bertrand Lemasle	8ec63316ca	Fix SIM808 reset pin being tied to hardware reset. Fixed ground pads on sdcard	il y a 7 ans
Bertrand Lemasle	9d53e08a83	Replaced MOLEX_104031-0811 with cheaper and easier Hirose_DM3AT-SF-PEJM5	il y a 7 ans
Bertrand Lemasle	e5751217e4	Move sd card right pull up resistor a bit avoid conflicts	il y a 7 ans
Bertrand Lemasle	42c2b91ba7	Moved some silkscreen references	il y a 7 ans
Bertrand Lemasle	47a778f68c	Enhanced routing of the sd card pullup resistors	il y a 7 ans
Bertrand Lemasle	b6cb5a5e01	Moved SIM808_S track a bit to leave more room for GND1 of the SIM card	il y a 7 ans
Bertrand Lemasle	21a01c8439	PCB version bump	il y a 7 ans
Bertrand Lemasle	48c7bd821a	Augmented the pad size of the battery holder for hand soldering	il y a 7 ans
Bertrand Lemasle	c96a87e59e	Flip back sd card footprint. Routing around pull up resistor is to be redone	il y a 7 ans
Bertrand Lemasle	d9a28ad356	Disconnected SD card detect from ground. Made usb GND pad bigger	il y a 7 ans
Bertrand Lemasle	03e770195f	Updated schematics references with updated and available parts. This is the version that was ordered on Mouser/Seeedstudio	il y a 7 ans
Bertrand Lemasle	66161c4925	Update BOM and added some vias	il y a 7 ans
Bertrand Lemasle	1dc73b9fc9	Moved BT2 up	il y a 7 ans
Bertrand Lemasle	0eba807da4	Rounded corners	il y a 7 ans
Bertrand Lemasle	0b60073f21	Changed PCB with the Wuerth USB connector	il y a 7 ans
Bertrand Lemasle	96dc2a3d7d	Replaced USB connector by Wuerth one	il y a 7 ans
Bertrand Lemasle	03a1c095a5	Fixed references for 4.7uF capacitor	il y a 7 ans
Bertrand Lemasle	fc234d3e83	Ordered PCB	il y a 7 ans
Bertrand Lemasle	971eb22091	Made the usb connector vertical	il y a 7 ans
Bertrand Lemasle	0686718167	Specified conda and resistors. PCB needs to be updated (usb condo from 1210 to 0805)	il y a 7 ans
Bertrand Lemasle	6e3e05ebd8	Change a few tracks/via to avoid ground planes breaks	il y a 7 ans
Bertrand Lemasle	a510935557	Submitted version for verification	il y a 7 ans
Bertrand Lemasle	11deba268e	Antennas tracks impedance to 50ohm (1.5mm thick)	il y a 7 ans
Bertrand Lemasle	66d3bf63f8	Added vias to the whole PCB	il y a 7 ans
Bertrand Lemasle	9f3deffa4d	Added via near decoupling capacitors	il y a 7 ans
Bertrand Lemasle	4c02ff9bcf	Fix libraries path to enhance portability accross different machines	il y a 7 ans
Bertrand Lemasle	746f8c3d77	Finished PCB, powering eeprom from arduino	il y a 7 ans
Bertrand Lemasle	44b3b7e7bf	Finsihed routing	il y a 7 ans
Bertrand Lemasle	9c731345c3	Most of the routing is done (missing sdcard)	il y a 7 ans
Bertrand Lemasle	dce640f8fa	All major components are roughly placed	il y a 7 ans
Bertrand Lemasle	4d1710a561	Redo - Arduino, Sim & power supply	il y a 7 ans
Bertrand Lemasle	e588336a6f	Started redo - FTDI / USB	il y a 7 ans
Bertrand Lemasle	fb001571c7	More routing	il y a 7 ans
Bertrand Lemasle	57aa544bd4	Started routing	il y a 7 ans
Bertrand Lemasle	24c91ba794	Component placement	il y a 7 ans
Bertrand Lemasle	7022ed6f4d	Done schematic (not verified)	il y a 7 ans
Bertrand Lemasle	d99a681386	Started footprints assignment	il y a 7 ans
Bertrand Lemasle	f66c705769	Replaced SIM808 lib with a better one	il y a 7 ans
Bertrand Lemasle	07aa405293	Circuitry is mostly done	il y a 7 ans
Bertrand Lemasle	35928e09c8	Power supplies	il y a 7 ans
Bertrand Lemasle	774a993cb1	Major building blocks are there	il y a 7 ans
Bertrand Lemasle	01882e9250	Initial commit. Many additional librairies will be removed later	il y a 7 ans