GPS
/
gpstracker-pcb
огледало од https://github.com/blemasle/gpstracker-pcb.git
1
0
Креирај огранак 0
Код Дискусије 0 Издања 1 Вики Activity
42 Комити
2 Гране
2.8 MiB
Дрво: 8ec63316ca
Гране Ознаке
${ item.name }
Create branch ${ searchTerm }
from '8ec63316ca'
${ noResults }
Commit Graph

33 Комити (8ec63316cab93be1ff768d5ab827b1c7f32bf38a)

Аутор SHA1 Порука Датум
  Bertrand Lemasle 8ec63316ca Fix SIM808 reset pin being tied to hardware reset. Fixed ground pads on sdcard пре 7 година
  Bertrand Lemasle 9d53e08a83 Replaced MOLEX_104031-0811 with cheaper and easier Hirose_DM3AT-SF-PEJM5 пре 7 година
  Bertrand Lemasle e5751217e4 Move sd card right pull up resistor a bit avoid conflicts пре 7 година
  Bertrand Lemasle 42c2b91ba7 Moved some silkscreen references пре 7 година
  Bertrand Lemasle 47a778f68c Enhanced routing of the sd card pullup resistors пре 7 година
  Bertrand Lemasle b6cb5a5e01 Moved SIM808_S track a bit to leave more room for GND1 of the SIM card пре 7 година
  Bertrand Lemasle 21a01c8439 PCB version bump пре 7 година
  Bertrand Lemasle 48c7bd821a Augmented the pad size of the battery holder for hand soldering пре 7 година
  Bertrand Lemasle c96a87e59e Flip back sd card footprint. Routing around pull up resistor is to be redone пре 7 година
  Bertrand Lemasle d9a28ad356 Disconnected SD card detect from ground. Made usb GND pad bigger пре 7 година
  Bertrand Lemasle 03e770195f Updated schematics references with updated and available parts. This is the version that was ordered on Mouser/Seeedstudio пре 7 година
  Bertrand Lemasle 66161c4925 Update BOM and added some vias пре 7 година
  Bertrand Lemasle 1dc73b9fc9 Moved BT2 up пре 7 година
  Bertrand Lemasle 0eba807da4 Rounded corners пре 7 година
  Bertrand Lemasle 0b60073f21 Changed PCB with the Wuerth USB connector пре 7 година
  Bertrand Lemasle fc234d3e83 Ordered PCB пре 7 година
  Bertrand Lemasle 971eb22091 Made the usb connector vertical пре 7 година
  Bertrand Lemasle 6e3e05ebd8 Change a few tracks/via to avoid ground planes breaks пре 7 година
  Bertrand Lemasle a510935557 Submitted version for verification пре 7 година
  Bertrand Lemasle 11deba268e Antennas tracks impedance to 50ohm (1.5mm thick) пре 7 година
  Bertrand Lemasle 66d3bf63f8 Added vias to the whole PCB пре 7 година
  Bertrand Lemasle 9f3deffa4d Added via near decoupling capacitors пре 7 година
  Bertrand Lemasle 746f8c3d77 Finished PCB, powering eeprom from arduino пре 7 година
  Bertrand Lemasle 44b3b7e7bf Finsihed routing пре 7 година
  Bertrand Lemasle 9c731345c3 Most of the routing is done (missing sdcard) пре 7 година
  Bertrand Lemasle dce640f8fa All major components are roughly placed пре 7 година
  Bertrand Lemasle 4d1710a561 Redo - Arduino, Sim & power supply пре 7 година
  Bertrand Lemasle e588336a6f Started redo - FTDI / USB пре 7 година
  Bertrand Lemasle fb001571c7 More routing пре 7 година
  Bertrand Lemasle 57aa544bd4 Started routing пре 7 година
  Bertrand Lemasle 24c91ba794 Component placement пре 7 година
  Bertrand Lemasle 7022ed6f4d Done schematic (not verified) пре 7 година
  Bertrand Lemasle 01882e9250 Initial commit. Many additional librairies will be removed later пре 7 година