GPS
/
gpstracker-pcb
espelho de https://github.com/blemasle/gpstracker-pcb.git
1
0
Derivar 0
Código Questões 0 Lançamentos 1 Wiki Trabalho
52 Cometimentos
2 Ramos
59 MiB
Ramo: master
Ramos Etiquetas
${ item.name }
Criar ramo ${ searchTerm }
de 'master'
${ noResults }
Gráfico de cometimentos

52 Cometimentos (master)
 

Autor SHA1 Mensagem Data
  Bertrand Lemasle e096213cf2 Updated README.md after repository name change há 6 anos
  Bertrand Lemasle 12fb0fe36d Fixed firmware repository link há 6 anos
  Bertrand Lemasle 8f3450e24f Added assets to and updated README.md há 6 anos
  Bertrand Lemasle 0e0a0d495e Added LICENSE.md and README.md há 6 anos
  Bertrand Lemasle 50dc735d8c Merge branch 'redo' há 6 anos
  Bertrand Lemasle fdadbf290b Reported last changes from schematics to PCB há 7 anos
  Bertrand Lemasle e74186b7da Changed MCP73831T-2ACI/OT to MCP73832T-5ACI/OT há 7 anos
  Bertrand Lemasle 828ad45acf Pulled down WP pin of 24LC512 to avoid floating pin issues that prevents writing to the chip (not reported on pcb yet). há 7 anos
  Bertrand Lemasle bc2a7618d2 Fixed LED6 & LED7 being polarity reversed há 7 anos
  Bertrand Lemasle 38c97b81bb Made SIM808 pads longer for easier hand soldering há 7 anos
  Bertrand Lemasle 8ec63316ca Fix SIM808 reset pin being tied to hardware reset. Fixed ground pads on sdcard há 7 anos
  Bertrand Lemasle 9d53e08a83 Replaced MOLEX_104031-0811 with cheaper and easier Hirose_DM3AT-SF-PEJM5 há 7 anos
  Bertrand Lemasle e5751217e4 Move sd card right pull up resistor a bit avoid conflicts há 7 anos
  Bertrand Lemasle 42c2b91ba7 Moved some silkscreen references há 7 anos
  Bertrand Lemasle 47a778f68c Enhanced routing of the sd card pullup resistors há 7 anos
  Bertrand Lemasle b6cb5a5e01 Moved SIM808_S track a bit to leave more room for GND1 of the SIM card há 7 anos
  Bertrand Lemasle 21a01c8439 PCB version bump há 7 anos
  Bertrand Lemasle 48c7bd821a Augmented the pad size of the battery holder for hand soldering há 7 anos
  Bertrand Lemasle c96a87e59e Flip back sd card footprint. Routing around pull up resistor is to be redone há 7 anos
  Bertrand Lemasle d9a28ad356 Disconnected SD card detect from ground. Made usb GND pad bigger há 7 anos
  Bertrand Lemasle 03e770195f Updated schematics references with updated and available parts. This is the version that was ordered on Mouser/Seeedstudio há 7 anos
  Bertrand Lemasle 66161c4925 Update BOM and added some vias há 7 anos
  Bertrand Lemasle 1dc73b9fc9 Moved BT2 up há 7 anos
  Bertrand Lemasle 0eba807da4 Rounded corners há 7 anos
  Bertrand Lemasle 0b60073f21 Changed PCB with the Wuerth USB connector há 7 anos
  Bertrand Lemasle 96dc2a3d7d Replaced USB connector by Wuerth one há 7 anos
  Bertrand Lemasle 03a1c095a5 Fixed references for 4.7uF capacitor há 7 anos
  Bertrand Lemasle fc234d3e83 Ordered PCB há 7 anos
  Bertrand Lemasle 971eb22091 Made the usb connector vertical há 7 anos
  Bertrand Lemasle 0686718167 Specified conda and resistors. PCB needs to be updated (usb condo from 1210 to 0805) há 7 anos
  Bertrand Lemasle 6e3e05ebd8 Change a few tracks/via to avoid ground planes breaks há 7 anos
  Bertrand Lemasle a510935557 Submitted version for verification há 7 anos
  Bertrand Lemasle 11deba268e Antennas tracks impedance to 50ohm (1.5mm thick) há 7 anos
  Bertrand Lemasle 66d3bf63f8 Added vias to the whole PCB há 7 anos
  Bertrand Lemasle 9f3deffa4d Added via near decoupling capacitors há 7 anos
  Bertrand Lemasle 4c02ff9bcf Fix libraries path to enhance portability accross different machines há 7 anos
  Bertrand Lemasle 746f8c3d77 Finished PCB, powering eeprom from arduino há 7 anos
  Bertrand Lemasle 44b3b7e7bf Finsihed routing há 7 anos
  Bertrand Lemasle 9c731345c3 Most of the routing is done (missing sdcard) há 7 anos
  Bertrand Lemasle dce640f8fa All major components are roughly placed há 7 anos
  Bertrand Lemasle 4d1710a561 Redo - Arduino, Sim & power supply há 7 anos
  Bertrand Lemasle e588336a6f Started redo - FTDI / USB há 7 anos
  Bertrand Lemasle fb001571c7 More routing há 7 anos
  Bertrand Lemasle 57aa544bd4 Started routing há 7 anos
  Bertrand Lemasle 24c91ba794 Component placement há 7 anos
  Bertrand Lemasle 7022ed6f4d Done schematic (not verified) há 7 anos
  Bertrand Lemasle d99a681386 Started footprints assignment há 7 anos
  Bertrand Lemasle f66c705769 Replaced SIM808 lib with a better one há 7 anos
  Bertrand Lemasle 07aa405293 Circuitry is mostly done há 7 anos
  Bertrand Lemasle 35928e09c8 Power supplies há 7 anos