GPS
/
gpstracker-firmware
spogulis no https://github.com/blemasle/gpstracker-firmware.git
1
0
Atdalīts 0
Kods Problēmas 0 Laidieni 8 Vikivietne Aktivitāte
142 Revīzijas
7 Atzari
2.9 MiB
Koks: 8f07a185c5
Atzari Tagi
${ item.name }
Izveidot atzaru ${ searchTerm }
no '8f07a185c5'
${ noResults }
Revīziju grafs

33 Revīzijas (8f07a185c5cffc82c3368e4ef0844959c0dbe61d)

Autors SHA1 Ziņojums Datums
  Bertrand Lemasle 8f07a185c5 Using snprintf instead of sprintf to build sms message pirms 6 gadiem
  Bertrand Lemasle d0ef217f75 Reworked code to fix missing network::powerOff in notifyFailures pirms 6 gadiem
  Bertrand Lemasle 95b43e3f44 Added a fourth alert (RTC clock halt) and saving active alerts to eeprom to survive resets pirms 6 gadiem
  Bertrand Lemasle 3b08d64b1f sprintf on arduino cannot handle %.2f format, using temperature * 100 as in the position csv format pirms 6 gadiem
  Bertrand Lemasle 6bc833750d Fixed bad use of constant. notifyFailures does not manage the state save of notified failures. pirms 6 gadiem
  Bertrand Lemasle 250b5b3371 Added SMS send code to core::notifyFailures pirms 6 gadiem
  Bertrand Lemasle 8d51ceb975 Added alerts notification and clearance in the main core function pirms 6 gadiem
  Bertrand Lemasle c7063a5698 Moved RTC time update from GPS to Core workflow rather than position acquisition. Avoid edge cases where the spend time measurement could be wrong because of time update in between the two measure points. pirms 6 gadiem
  Bertrand Lemasle 0894a1cb0e Fixed long pause detection would never occur because of the use of max instead of min pirms 7 gadiem
  Bertrand Lemasle 5e220b23b2 [Untested] Reset StoppedInARow if gap between the previous and current position is more than a default value (try to detect missed positions) pirms 7 gadiem
  Bertrand Lemasle deaf10ed53 Stopped at boot up means going to long sleep. Fixed long sleep would result in a backup each time pirms 7 gadiem
  Bertrand Lemasle 6b41da4c9a Ability to force backup. Forcing backup when "stopping" pirms 7 gadiem
  Bertrand Lemasle eeee73206c Sleep time computation algorithm adjustements pirms 7 gadiem
  Bertrand Lemasle 404fccca5b Enabling network before acquiring gps position to save some time. Reduced timeouts pirms 7 gadiem
  Bertrand Lemasle f687c9d11a Adjusted log level : verbose is really in a case of a hard debugging session pirms 7 gadiem
  Bertrand Lemasle 1b8e898a9b Introduced speed timing variations based on time of the day pirms 7 gadiem
  Bertrand Lemasle 6a2a305cd1 Adjusted log levels pirms 7 gadiem
  Bertrand Lemasle 01f3a488a1 Added some code to reduce the effect of a gps fix that would indicate no speed, leaving the device in sleep mode for too long pirms 7 gadiem
  Bertrand Lemasle b64990c0a5 Code cleanup after DS3231 trim pirms 7 gadiem
  Bertrand Lemasle 33ad3149d9 Added structure for sd card positions backup implementation pirms 7 gadiem
  Bertrand Lemasle 2d9121855c Changed useless pass by ref argument in gps::getVelocity pirms 7 gadiem
  Bertrand Lemasle 06c331ce41 Code cleanup pirms 7 gadiem
  Bertrand Lemasle 8ff02bf6c2 Added timeToFix to each position entry, reorganized code a bit to withdraw responsabilities from core::main pirms 7 gadiem
  Bertrand Lemasle c0107ab80e Implemented temperature reading and logging pirms 7 gadiem
  Bertrand Lemasle ed7a10e47e Added sleep debug function and NOTICE_XXX macros pirms 7 gadiem
  Bertrand Lemasle 6e0060c432 Removed useless calls to rtc::powerOn && rtc::powerOff pirms 7 gadiem
  Bertrand Lemasle 3c9a53a6c0 Improved logs pirms 7 gadiem
  Bertrand Lemasle 4c76a75e65 Implemented config and positions saving to eeprom. pirms 7 gadiem
  Bertrand Lemasle 65afc63249 Redesigned main loop to allow for debug programs and commands pirms 7 gadiem
  Bertrand Lemasle 0d24ef07e3 Using define instead of magic numbers. Started to implement speed vs sleep time logic pirms 7 gadiem
  Bertrand Lemasle bf9c9d58ca Cleaned unnecessary code pirms 7 gadiem
  Bertrand Lemasle a8b9d65327 Started building major bricks and global algorithm pirms 7 gadiem