gpstracker-firmware

Wykres commitów

Autor	SHA1	Wiadomość	Data
Bertrand Lemasle	6ec9d19094	Moved contact phone number inside sendSms (since there is one number, no need for core to know it)	6 lat temu
Bertrand Lemasle	8b01ba9a5a	Reduced code size by refactoring sms buffer management	6 lat temu
Bertrand Lemasle	c303ca86fc	Moved and renamed code for clarity	6 lat temu
Bertrand Lemasle	1c69e884b0	Increased SMS buffer size to match possible all messages	6 lat temu
Bertrand Lemasle	43a4c8c7af	Optimized alert messaging creation using flash string	6 lat temu
Bertrand Lemasle	8f07a185c5	Using snprintf instead of sprintf to build sms message	6 lat temu
Bertrand Lemasle	d0ef217f75	Reworked code to fix missing network::powerOff in notifyFailures	6 lat temu
Bertrand Lemasle	95b43e3f44	Added a fourth alert (RTC clock halt) and saving active alerts to eeprom to survive resets	6 lat temu
Bertrand Lemasle	3b08d64b1f	sprintf on arduino cannot handle %.2f format, using temperature * 100 as in the position csv format	6 lat temu
Bertrand Lemasle	6bc833750d	Fixed bad use of constant. notifyFailures does not manage the state save of notified failures.	6 lat temu
Bertrand Lemasle	250b5b3371	Added SMS send code to core::notifyFailures	6 lat temu
Bertrand Lemasle	8d51ceb975	Added alerts notification and clearance in the main core function	6 lat temu
Bertrand Lemasle	c7063a5698	Moved RTC time update from GPS to Core workflow rather than position acquisition. Avoid edge cases where the spend time measurement could be wrong because of time update in between the two measure points.	6 lat temu
Bertrand Lemasle	0894a1cb0e	Fixed long pause detection would never occur because of the use of max instead of min	7 lat temu
Bertrand Lemasle	5e220b23b2	[Untested] Reset StoppedInARow if gap between the previous and current position is more than a default value (try to detect missed positions)	7 lat temu
Bertrand Lemasle	deaf10ed53	Stopped at boot up means going to long sleep. Fixed long sleep would result in a backup each time	7 lat temu
Bertrand Lemasle	6b41da4c9a	Ability to force backup. Forcing backup when "stopping"	7 lat temu
Bertrand Lemasle	eeee73206c	Sleep time computation algorithm adjustements	7 lat temu
Bertrand Lemasle	404fccca5b	Enabling network before acquiring gps position to save some time. Reduced timeouts	7 lat temu
Bertrand Lemasle	f687c9d11a	Adjusted log level : verbose is really in a case of a hard debugging session	7 lat temu
Bertrand Lemasle	1b8e898a9b	Introduced speed timing variations based on time of the day	7 lat temu
Bertrand Lemasle	6a2a305cd1	Adjusted log levels	7 lat temu
Bertrand Lemasle	01f3a488a1	Added some code to reduce the effect of a gps fix that would indicate no speed, leaving the device in sleep mode for too long	7 lat temu
Bertrand Lemasle	b64990c0a5	Code cleanup after DS3231 trim	7 lat temu
Bertrand Lemasle	33ad3149d9	Added structure for sd card positions backup implementation	7 lat temu
Bertrand Lemasle	2d9121855c	Changed useless pass by ref argument in gps::getVelocity	7 lat temu
Bertrand Lemasle	06c331ce41	Code cleanup	7 lat temu
Bertrand Lemasle	8ff02bf6c2	Added timeToFix to each position entry, reorganized code a bit to withdraw responsabilities from core::main	7 lat temu
Bertrand Lemasle	c0107ab80e	Implemented temperature reading and logging	7 lat temu
Bertrand Lemasle	ed7a10e47e	Added sleep debug function and NOTICE_XXX macros	7 lat temu
Bertrand Lemasle	6e0060c432	Removed useless calls to rtc::powerOn && rtc::powerOff	7 lat temu
Bertrand Lemasle	3c9a53a6c0	Improved logs	7 lat temu
Bertrand Lemasle	4c76a75e65	Implemented config and positions saving to eeprom.	7 lat temu
Bertrand Lemasle	65afc63249	Redesigned main loop to allow for debug programs and commands	7 lat temu
Bertrand Lemasle	0d24ef07e3	Using define instead of magic numbers. Started to implement speed vs sleep time logic	7 lat temu
Bertrand Lemasle	bf9c9d58ca	Cleaned unnecessary code	7 lat temu
Bertrand Lemasle	a8b9d65327	Started building major bricks and global algorithm	7 lat temu

38 Commity (6ec9d190941180e6fc71ce6f77db775f1529a92a)